This is a smart charger which means that the charger automatically charges and cuts off when the battery is full. Some cheaper low-end chargers do not support this meaning you have to work out how long to charge for, with this charger you can plug it in and not have to worry about when the battery is full, as the charger will cut off the power supply when it is full to prevent any damage to the battery.

 

The charger features an LCD display screen which allows you to configure the charger to your perfect settings, as well as see information about the battery as it charges and any errors which may occur. The charger itself has many high-end features, with the ability to charge a wide range of batteries and support many operations required to maintain them as well.

 

The charger features an internal lithium battery balancer which allows the charger to detect individual cell voltage so there is no need to connect an external balancer before charging, and automatically stops balance charging each individual cell when they are full or if an abnormal cell voltage is detected. The charger has the ability to detect the delta-peaks of the battery whilst they are being charged, meaning that the charger will automatically stop once the battery is full, or the charge limit is exceeded for that battery type. A time limit can also be set to prevent the charger from infinitely charging.

 

The charger has an internal memory meaning that settings and options can be stored on the unit to save time entering information next time you come to charge your battery. Data for up to five batteries can be stored and can be recalled easily without the use of any specialist program.

 

The charger comes with an EU-style power plug to plug into any standard UK Shaving socket, along with charging cables to convert the XT60 charging output to Deans and mini-Tamiya, the two most common batteries connector types. There is also a front port allowing the connection of balanced cables for LiPo and LiFe batteries which supports a battery with up four cells. Additionally there is another port for attaching temperature monitors which can be used as an extra level of safety.

 

This charger is perfect for any Airsoft skirmisher who is looking for a charger that charges all the common types of Airsoft batteries on the market today, with high levels of customisation for the perfect charge.

 

Built by NUPROL as part of their POWER Range

High quality smart charger system

Charges LiPo / LiFe / LiHV / Li-Ion / NiMh / NiCd and Pb batteries

Charges almost every single battery type you'll require for Airsoft

Internal lithium battery balancer

Individual cell balancing and monitoring

Delta-peak sensitivity to protect the battery and charger

Automatic current charging limit

Capacity limiter

Optional temperature threshold detection

Charge time limiter

Input power monitoring

Data storage/load thanks to on-board memory

Cyclic charging and discharging

Allows the connection of batteries with an XT60, Deans or Mini-Tamiya connector

Supports LiPo, LiFe, and LiHv with up to 4 cells

Built-in internal cooling fan

Internal power supply system with no need for an external power brick

Large, tactile and easy to use buttons

Visual LCD display screen

Supports 100-240 AC input

Charge power of 60W

Max discharge power of 10 watt

0.1A - 6.0A charge current range

Supports PB battery betwen 6v - 12v

Detailed warning and error display
 

60W Smart Charger

Plug Power Lead

XT60 to Deans Cable

Deans to Mini-Tamiya Adaptor
 

Please ensure that when charging batteries you always do so in a fire safe environment, such as in a battery charging back.

 

Do not charge any damaged batteries, as this can lead to further damage. Examples of this are: Swollen / puffy batteries, damaged wires, or fully discharged batteries.

 

When charging batteries with a balance cable always ensure they are connected to both the balance port and the power output.

 

Please ensure you read ALL documentation before using this charger.

 

For usage instructions please refer to the manual included with the charger, as this covers every type of battery which can be used with the charger.

 

 

REVERSE POLARITY - Incorrect polarity connected.

CONNECTION BREAK - The battery's wires are disconnected or damaged.

SHORT ERR - There has been a short circuit, check for damaged wires or touching contacts.

VOL SELECT ERROR - The wrong voltage has been selected for the attached battery.

BREAK DOWN - The charger has malfunctioned. Please get in touch with us for further assistance.

BATTERY CHECK LOW VOLTAGE - The battery's voltage is lower than the option selected. This can either mean the incorrect voltage has been selected or the battery is dead.

BATTERY CHECK HIGH VOLTAGE - The voltage is higher than which is set, check the number of cells in the battery pack.

BATTERY CHECK CELL LOW VOL - Voltage of a single cell in the battery pack is too low. This usually means the battery is damaged.

BATTERY CHECK CELL HIGH VOL - Voltage of a single cell in the battery pack is too high. This usually means the battery is damaged.

BATTERY VOLERR CELL CONNET - A connection cannot be made to one of the cells. Please check the battery and the connecting cables.

TEMP OVER ERR - The temperature of the charger is too high, and will need to be cooler before it can begin again.

CONTROL FAILURE - The charger has malfunctioned. Please get in touch with us for further assistance.